SX KQSPAN roof forming machine /roofing sheet bending machine
Product Description
MAIN TECHNICAL SPECIFICATION
1. Size: 10300mm×2250mm×2300mm
2. Total weight: About 13000KG
3. Material of bending leaf: Stainless Steel, 12mm
4. Cutting Material: Cr12, 1MoV, Heat treatment
5. Cutting type: Hydraulic / Mechanical controlling cutting
6. Total motor power: 18.5KW
Forming Power: 7.5KWBending Power: 4.0KW
Cutting Power: 4.0KW Conical Power: 3.0KW
7. Material of rollers: 45# steel, quenched HRC 58-62
8. Material of shafts: 45# steel, adjusted
9.Step of rollers: 13
10. Applicable Span: 25m
11.Width of the Panel: Feeding width: 914mm
12. Finished width650mm
13. The depth of the groove: 203mm
14. Operating factor of the panel: 71.1%
15. Thickness of the Panel: 0.8-1.5mm
16.Working Speed: Straight Sheet: 15m/min
Arch Sheet: 13m/min
Seaming: 6m/min
17. Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement
18. Controlling system: PLC
19. Working procedures: feeding-forming-cutting-curving
1. Are you manufacturer?
Yes, we are the manufacturer in Yingkou since 1992.
2. What information you need before quoting me?
We need profile drawing of the panel you want to produce, material information and your
special requirements.
3. What payment terms you accept?
Commonly is T/T, 30% deposit and 70% balance before shipment after inspection. L/C at sight
is also available.
4. Can you make machine according to my design?
Yes, we have experienced technical team to work out the suitable design for you and confirm
with you until you agree.
Product Categories : ACM K Q Span Arch Roof Machine > SX-914-650